01 / 04
Bring your own asset
A vessel, a circuit, or a turnaround scope, loaded from your data, never a canned sample.
Book a working session
Get live before your next turnaround.
Twenty minutes to see the platform. Sixty to see it on your own data. We bring the configuration, you bring the asset.
We configure against:API 510API 570API 653API 579ASMENACE / AMPP
See it live, on your data
The session, step by step. Live, on your data.
Bring your asset, watch the loop close, leave with the configured slice: sixty minutes, no slides.
- 01
Bring your asset
A vessel, a circuit, a turnaround scope.
- 02
Watch the loop close
Field reading to a cited audit answer.
- 03
Leave with it
The configured slice. Decide later.
What to expect
- 1
Bring your own asset
A vessel, a circuit, a turnaround scope, your data, not a canned demo.
- 2
Watch the loop close
From a field reading to a cited audit answer, in one 60-minute session.
- 3
No commitment
Leave with the configured slice. Decide later, on the evidence.
Prefer email? Reach a practitioner directly at hello@intellispec.com.
The loop, closed live
From a field reading to a cited answer, on one thread.
One reading enters, gets checked against your codes, and leaves as an answer you can sign.
- A measurement lands and ties to the asset, the line, and the date.
- The platform applies the governing code and shows the math behind it.
- You leave with a cited answer, traceable to the reading that produced it.
Inside the working session
One asset, one closed loop.
Sixty minutes, your data, your codes, and a cited answer you walk away with.
02 / 04
Configure to your codes
We map your asset to API 510, 570, 653, or 579 so the math matches your standards.
03 / 04
Watch the loop close
A field reading runs through the platform and resolves to a cited answer, live in the room.
04 / 04
Leave with no commitment
Keep the configured slice and the evidence it produced, then decide later on what you saw.
04 STEPS
SWIPE
“One thickness reading, taken live, resolved to a cited minimum-wall answer before the session ended.”
Answers
What the working session covers
What should we bring?
One real asset: a vessel, a piping circuit, or a turnaround scope. We load your data, not a canned sample. Inspection records, drawings, or a recent report are enough to start.
What is the difference between 20 and 60 minutes?
Twenty minutes walks the platform on our reference data. Sixty minutes configures it against your asset and your codes, then closes the loop from a field reading to a cited audit answer.
Is there any commitment?
None. You leave with the configured slice and the evidence it produced. No contract, no procurement step, no follow-up obligation. Decide later, on what you saw.
Who should attend?
Whoever owns integrity outcomes: an inspector, a reliability or mechanical engineer, and anyone who signs the audit answer. Three or four people is plenty for a working session.